Overview
Telephone type
Select the telephone type or DECT base you want to display/configure.
*Further help under Hardware
Name
Freely selectable name. This name is used to identify the device within the PBX.
*Further help under Hardware
MAC address
The MAC address of the device is used for identification. For all transactions between device and PBX, the PBX must be able to identify the MAC address of the device so that the device can be matched to provisioning data.
The MAC address of a device can be found as follows:
Retrieving from a client certificate sent by the device
Reading with a bar code scanner enabled and connected to the computer (e.g. via a USB interface)
Reading e.g. on the menu of the phone or on a label
*Note: If the MAC address was determined via automatic provisioning or entered by yourselves, the device will be provided with provisioning data during its first boot process.
*Further help under Hardware
Manufacturer
The manufacturer name of the device. If automatic provisioning is enabled, the name is entered by the PBX as long as the device provides this information.
*Further help under Hardware
Model
The model name of the device. If automatic provisioning is enabled, the name is entered by the PBX as long as the device provides this information.
*Further help under Hardware
Version
The currently used firmware version for this device. If automatic provisioning is enabled, the name is entered by the PBX as long as the device provides this information.
*Further help under Hardware
User
The user assigned to this telephone or the user currently logged onto this telephone.
---
No user is assigned or no user is logged on.
The telephone is freely available for users with roaming user authorisation.
[Phone number] | [name]
A user is assigned or a user is logged on.
Currently not available for other users who have roaming user authorisation.
The current user can log out with roaming user authorisation or free up the telephone.
[Phone number] | [name]
A user is permanently assigned. Therefore, he is the owner. The owner is logged on.
Not available for other users who have roaming user authorisation.
The owner can log out without any other authorisation, but remains the owner.
--- [(Phone number] | [name)]
A user is permanently assigned. Therefore, he is the owner. The owner is logged out.
Not available for other users who have roaming user authorisation.
The owner can log on without any other authorisation.
[Phone number] | [name]
Mobile telephone A user is permanently assigned. Therefore, he is the owner. Incoming calls to the owner are signalled on the mobile telephone.
The owner can switch off calls to their mobile telephone without any other authorisation.
--- [(Phone number] | [name)]
Mobile telephone A user is permanently assigned. Therefore, he is the owner. Incoming calls to the owner are not signalled on the mobile telephone.
The owner can switch on calls to their mobile telephone without any other authorisation.
---
Mobile telephone No user assigned.
[Phone number] | [name]
Mobile telephone A user is assigned. Incoming calls to the user are signalled on the mobile telephone.
*Note: If no assignment is possible, the maximum number of enabled users has been exceeded. Another user licence is necessary. The number of used/available user licences is displayed here: Telephones > Assignment.
*Further help under User
*Further help under Roaming User
*Further help under FMC
Configure
Opens the configuration of the device.
*Details about settings under Configure
Filter
The list is filtered by the entered or selected value.
New
Adds a new telephone type/new DECT base.
*Details about settings under Adding
Delete
Deletes the entries marked in the list.