The MAC address of the device is used for identification. For all transactions between device and PBX the PBX must be able to identify the MAC address of the device so that the device can be matched to provisioning data.
The MAC address of a device can be found as follows:
• Retrieving from a client certificate sended by the device
• Reading with a bar code scanner enabled and connected to the computer (e.g. via a USB interface)
• Reading e.g. on the menu oft the phone or on a label
Note: If the MAC address was determined via automatic provisioning or entered by yourselves, the device will be provided with provisioning data during its first boot process.
The manufacturer name of the device. If automatic provisioning is enabled, the name is entered by the PBX as long as the device provides this information.
The currently used firmware version for this device. If automatic provisioning is enabled, the name is entered by the PBX as long as the device provides this information.
No user has been assigned to this telephone. The telephone is freely available for users with authorisation fro Roaming User.
[Phone number] | [name]
A user has been assigned to this telephone.
The assignment can be made two ways: either the administrator makes the assignment on the web interface or the user authorised for Roaming User directly logs in on the telephone with his PIN and user phone number.
Other users with authorisation Roaming User do not have access to this telephone befor the user has been logged out.
[Phone number] | [name]
A user has been assigned permanently to this telephone and is logged in. Therefore, he is the owner. There is no access for other users with authorisation for Roaming User.
--- [(Phone number] | [name)]
The permanently assigned user has been logged out by the user using the web interface or the user has been logged out using the telephone. There is still no access for other users with authorisation for Roaming User. The user remains owner and can log back in at any time or be logged in by the administrator.
Note: If the number of activated users has been exceeded, access or an assignment is still not possible. Another user licence is necessary. The number of used/available user licences is displayed on the lower image margin.