Help > User Interface > Settings > Identity
Identity
*Note: Various identity settings are automatically set via provisioning by the PBX and should not be changed.
*Note: Some of the identity settings can only be viewed via the backup file (*.xml) and can only be changed via backup or provisioning: display name, domain, port, DNS and STUN server, DTMF method, country, area code and handling for subscription and registration
*Further help under Backup
*Further help under Provisioning
Active
Enables the identity.
Encryption
The calls are encrypted to prevent eavesdropping. The connection setup and termination, and also call signalling, are encrypted with SIPS. The call data is encrypted with SRTP.
*Note: The setting must match the setting in the PBX.
*Further help under Identity
Own SIPS/SRTP certificate
If encryption is enabled, it is checked whether the certificate belongs to the domain/IP. The certificate must be known to the PBX.
Serial number
The serial number of the PBX.
*Note: Is set automatically via provisioning.
SIP user name
COMtrexx: SIP username of the softphone configured in the PBX (display without serial number).
COMpact: Phone number of the softphone configured in the PBX.
*Note: Is set during initial commissioning/registration.
Extension
COMtrexx: Phone number of the softphone configured in the PBX.
COMpact: blank.
*Note: Is set automatically via provisioning.
Voicemail number
Phone number of the voicemail box that was assigned to the softphone in the PBX.
*Note: Is set automatically via provisioning.
*Further help under Identity
Password
Password of the softphone configured in the PBX.
*Note: Is set during initial commissioning/registration.
IP version
Specifies which IP version (IPv4 or IPv6) the softphone uses.
Use of ICE
Enable the best possible transmission route to be found between the softphone and PBX.
Use of TURN
Enables the use of the Auerswald TURN server to make RTP data available outside your own network. Only enable this option if the softphone establishes connections in which no audio is transmitted.
Additional DNS server
Optional in case of connection problems: Address of a DNS server in addition to the Auerswald DNS servers.
*Note: Setting not available after activation of the system's own DNS servers (only via backup or provisioning).
Shows or changes the registration status of the softphone.
COMfortel SoftPhone 2 ready/registered
COMfortel SoftPhone 2 off
Registration in progress
Registration failed