Help > Using the Web Interface > Function keys > Edit parameters > Speed dial
Speed dial
Number/URI
Enter a phone number or address such as 198@192.168.XX.YY or 198@company.com, here.
*Further help under Speed dial
Identity
Identity for which this function is set up.
*Further help under Identities
Subscription
Activates the sending of BLF subscriptions to the PBX.
*Note: It may be a good idea to deactivate subscriptions in situations when it is necessary to prevent the PBX from being overloaded by high volumes of transmitted data.
Pickup
Activates the Pickup function.
*Note: Pickup only works if the Subscription function is activated.
*Note: Pickup should not be used if the key is only used to switch functions in the PBX using a programming code. Deactivate Pickup in that case.
*Further help under Pickup
InterCom
Enables the InterCom function. The connection with the destination number is established directly. No ringing or active call acceptance.
*Further help under InterCom
Signalise missed call
If this function is enabled, missed calls associated with the speed dial number are signalled with flashing green LEDs.
*Further help under Speed dial
Pickup-choice on key-press
If this function is switched on, a list of all the calls relevant for the function key, that can be taken via pickup, is displayed.
*Note: If this function is switched on, a call cannot be taken by pressing a key. Instead, a list of all the calls that can be taken via pickup is displayed, even if the list only contains one call.
*Further help under Pickup
Do not show in pickup list
If this function is switched on, calls that can be taken by pickup are not forwarded to the global pickup list.
*Further help under Pickup
Pickup of connected calls
If this function is switched on, calls that have already been connected can be picked up. This option is useful, for example, if an answering machine or mailbox number has been assigned to the speed dialling key. The calls are included in the global pickup list.
*Further help under Pickup
Signal presence
If this function is switched on, the following states are transmitted (if they are supported by the PBX):
•Successful registration of the monitored phone number on the PBX
•Do not disturb
•Call forwarding
Default: disabled.