Detailed information on energy consumption
The phone already consumes little energy in normal operation. Further savings are possible by using the power management function. By default, the power management function is activated after 5 minutes (from firmware version 2.12).
Important: Switching off the power management function increases the energy consumption of your phone.
Further help under Display and LEDThe following values were measured based on the requirements of Commission Regulation (EU) 2023/826 of 17 April 2023 laying down ecodesign requirements of electrical and electronic household and office equipment:
Use of the wireless interface | Use of wired network interfaces | ||
with WLAN dongle | without WLAN dongle | with WLAN dongle | |
Power consumption in active mode | 6,3 W | 6,2 W | 6,4 W |
Period after which the equipment reaches automatically networked standby (here with power management function setting after 10 min) | 10 min | 10 min | 10 min |
Power consumption in networked standby | 5,0 W | 5,4 W | 5,2 W |
Note: Wireless interfaces are deactivated by removing the WLAN dongle.Further help under Wi-FiActive mode
Means a condition in which the equipment is connected to the mains power source and at least one of the main functions has been activated. Here: State of the phone during an ongoing call (after switch-on processes).
Networked standby
Means a condition in which the equipment is able to resume a function by way of a trigger from a network connection. Here: State of the phone after automatic activation of the power management function (after switch-on processes).