Help > Short Reference Phone > Functions listed alphabetically > Identification (IP Address, Subnet Mask, Gateway, DHCP Client)
Identification (IP Address, Subnet Mask, Gateway, DHCP Client)
*Note: Only IPv4 addresses can be entered using a character string on the phone. IPv6 addresses must be entered using the web interface of the PBX.
*Note: These settings may not be applicable to a configured second network interface.
Configuring the IPv4 Address of the PBX (on an internal phone)
## 8 > PIN > * 931 * > IP address > #
PIN
Admin PIN
IP address
IPv4 address of the PBX (12 digits)
*Further help under Network
Querying the IPv4 Address of the PBX (on an internal phone)
## 8 * 941 #
Additional information
Display of the IPv4 address of the PBX on the phone display after callback by the PBX
*Further help under Network
Configuring the Subnet Mask of the PBX (on an internal phone)
## 8 > PIN > * 932 * > Subnet mask > #
PIN
Admin PIN
Subnet mask
Subnet mask (12 digits)
*Further help under Network
Querying the Subnet Mask of the PBX (on an internal phone)
## 8 * 942 #
Additional information
Display of the subnet mask on the phone display after callback by the PBX
*Further help under Network
Configuring the Gateway of the PBX (on an internal phone)
## 8 > PIN > * 933 * > IP address > #
PIN
Admin PIN
IP address
IPv4 address of the gateway (12 digits)
*Further help under Network
Querying the Gateway of the PBX (on an internal phone)
## 8 * 943 #
Additional information
Display of the IPv4 address of the gateway on the phone display after callback by the PBX
*Further help under Network
Switching the DHCP Client of the PBX on (on an internal phone)
## 8 > PIN > * 930 * 1 #
PIN
Admin PIN
*Further help under Network
Switching the DHCP Client of the PBX off (on an internal phone)
## 8 > PIN > * 930 * 0 #
PIN
Admin PIN
*Further help under Network
Querying the DHCP Client Status of the PBX (on an internal phone)
## 8 * 940 #
Additional information
Display of the DHCP client status of the PBX on the phone display after callback by the PBX
0 = off
1 = on
*Further help under Network