Function keys
The basic version of the device has six function keys which you can program to suit your needs. Each function key has a multi-colour LED that indicates its status, based on its assignment.
The number of programmable function keys on the COMfortel D-200 or D-210 can be extended by adding up to three COMfortel D-XT20 or D-XT20i key extension modules (not included in the scope of delivery). Modules are attached to the right-hand side of the phone.
Note: If you connect more than one key extension module, use a COMfortel D-XT-PS power supply unit (not in the scope of delivery).The programmable function keys can each be defined three times (on three levels). Consequently, in the fully extended system, there are 198 programmable settings on 66 buttons.
Note: New parameters have been defined for some function keys (e.g. Speed dial) from firmware version 1.10. If functionality is restricted following an update to a higher firmware version, it might be sensible to delete the particular key and then configure it again.Configuration
Web interface:
•Function keys
Details about the settings are in Function keysPhone:
•Settings > Function keys
Details about the settings are in Function keysProvisioning:
Further help in the Auerswald DokuWikiProcedure for assigning function keys using the phone
1.Select a key to which a function has not already been assigned. All keys that have a function assigned to them shine orange.
2.If necessary, press the directional pad button or the Level soft key to change the key level.
3.Press the key to which a function is to be assigned.
Note: If a key to which a function has not been assigned is pressed for a longer time (long press), the menu for configuring the selected key opens automatically.The selected key flashes orange.
4.Select the function that is to be assigned to the key.
5.Set other necessary parameters, if necessary.
6.Confirm the settings you have made, using the OK soft key or the OK button .
The assigned key label is displayed on the display.
The key can be used with the function that has been assigned to it.
Selecting a Key Level
On the home screen:Change between key levels by pressing the following keys:
•directional pad Left and Right keys
•softkeyLevel
in the Choose a key: Change between key levels by pressing the following key:
•softkeyLevel
On the key extension module:Change between key levels by pressing the following key:
•control rocker
On the basic device, you can see the current key level on the horizontal scroll bar under the date display.
On the key extension module, you can see the current key level on the horizontal scroll bar on the top and bottom edge of the display.
The display content changes according to the selected key level. The function key names are also displayed.
If no function keys have functions assigned to them, the display does not change.
Process for assigning function keys using the Web Interface
1.Select a button to which a function has not already been assigned.
2.Change to the right level, if required (Level 1– 3 tab).
3.Select the function that is to be assigned to the key.
4.Set other necessary parameters, if necessary.
5.Save your settings.
The assigned key label is displayed on the display.
The key can be used with the function that has been assigned to it.
Extending the range of functionality using provisioning
You can use the templates in a provisioning file to extend the range of functions on the phone. These additional functions can be assigned to function keys.
Requirement for use
•Provisioning from PBX search enabled
Further help under Using provisioning•PBX firmware from Version 7.4
•Suitable template < > phone assignment on the PBX
During the next provisioning process, the configurations in the template file are loaded into the phone. The additional PBX functions are in the Choose a function (phone) or Function menu (web interface) and can be assigned to the function keys.
Further help in the Auerswald DokuWiki