Update
An update involves updating the firmware, to add new features and resolve any problems that might exist. Here, the device sets up a connection with an update server, from which it downloads the latest firmware. (The settings on the device remain unchanged). There are three ways of carrying out an update:
• Manual update
• Automatic update
• Using provisioning
You will find more information on the provisioning process in Provisioning
If the Check for updates function is activated, the device searches for updates at these times:
• Update attempt when the telephone is rebooted
• Update attempt after provisioning
• Update attempt according to the schedule.
Requirements for configuration
• Address of the update server
Manual Update
During a manual update, the downloading of the update is triggered manually. After the update, the phone restarts automatically.
Configuring a manual update
1.Enter the Update server URL
In the default settings: https://update.auerswald.de
Web interface:
• Update
For more information, see Update.Phone:
• Settings > Update
For more information, see Update.Provisioning:
• For more information, see Auerswald DokuWiki
Manual update process
1.Web interface: Press the Start update button
Phone: Press the Install soft key as soon as the message that a new firmware version is available is displayed on the screen.
Automatic update
In the case of an automatic update from the update server, a regular (e.g. weekly) automatic update can be configured. You can set the weekday and time.
Configuring an automatic update
1.Enable Automatically install updates
2.Enter the Update server URL
In the default settings: https://update.auerswald.de
3.Web interface:
Set the Weekdays and Clock Time.
Web interface:
• Update > Basic Settings
You will find more information on this subject in the Update.Phone:
• Settings > Update
You will find more information on this subject in the Update.Provisioning:
• For more information, see Auerswald DokuWiki
Automatic update process
It can take up to 60 minutes to perform an automatic update.
When you set the Weekday/Clock Time for an automatic update, the system checks for new firmware during this time period and downloads and installs it if necessary.
Is automatic update is not enabled, the system only checks for a newer version of the firmware during this time period.
If there is a newer version of the firmware, you are informed in a message on the screen.