VPN
Requirement for use
• Each end point must support the specific tunnelling protocol that is being used.
• You need to know the access data required to configure a VPN connection.
Configuration
Web interface:
• Network > Enable LAN Port VPN
For more information, see VPN.Phone:
• Settings > Network > VPN
Note: The VPN can merely be enabled/disabled on the phone. It can only be configured in the web interface or by provisioning. For more information, see VPN.Provisioning:
• For more information, see the Auerswald DokuWiki.
Note: An example configuration, for a FRITZ!box (a German DSL modem/router), is described in the Auerswald DokuWiki. This configuration cannot be applied to VPN connections that are to be set up in a company environment.Process
1.Drag the slider right to enable VPN.
Alternatively, you can enable VPN on the telephone.
2.Select the VPN type.
3.Enter the following parameters:
-Name
-Server
-User name
-Password
-DNS server
-Search domain
-IPsecIdentifier
-Forwarding routes
-Preinstalled IPsecSecret
4.Load files for these parameters:
-IPsecUserCert
-IPsecUserPrivateKey
-IPsecCaCert
-IPsec server certificate
-Open VPN Configuration
Follow these steps: Browse for the relevant file, select it and then tap > Save.
Other options in the upload fields and in the context menu which is now displayed are:
• View file
• Download
• Close
• Delete
• Copy
Caution: The settings for IPsec Xauth RSA- and IPsec Hybrid RSA-type VPN connections depend on which server is in use. The network administrator must predefine the configuration.