Function keys
The basic version of the device has six function keys which you can program to suit your needs. Each function key has a multi-colour LED that indicates its status, based on its assignment.
The number of programmable function keys on the COMfortel ® D-200 can be extended by adding up to three COMfortel ® D-XT20 key extension modules (not included in the scope of delivery). Modules are attached to the right-hand side of the phone.
Note: If you connect more than one key extension module, use a COMfortel ® D-XT-PS power supply unit (not in the scope of delivery) to supply power to the phone.The programmable function keys can each be defined three times (on three levels). Consequently, in the fully extended system, there are 198 programmable settings on 66 buttons.
You will find more information on operation and navigation in Function Keys next to the Screen
Configuration
Web interface:
• Function keys
For more information, see Function keys.Phone:
• Settings > Function keys
For more information, see Function keys.Provisioning:
• For more information, see Auerswald DokuWiki
Process for assigning function keys using the phone
1.Select a button to which a function has not already been assigned. All buttons that have a function assigned to them shine orange.
2.Change to the right level, if required, using the Level soft key or directional pad button.
3.Press the button to which a function is to be assigned.
The selected button flashes orange.
4.Select the function that is to be assigned to the button.
5.Set other necessary parameters, if necessary.
6.Confirm the settings you have made using the OK soft key or the OK button .
The assigned key label is displayed in the screen.
The button can be used with the function that has been assigned to it.
For more information, see Function keys.Process for assigning function keys using the Web Interface
1.Select a button to which a function has not already been assigned.
2.Change to the right level, if required (Level 1– 3 tab).
3.Select the function that is to be assigned to the button.
4.Set other necessary parameters, if necessary.
5.Save your settings.
The assigned key label is displayed in the screen.
The button can be used with the function that has been assigned to it.
You will find more information on this subject in the Edit function keys.Extending the range of functionality using provisioning
You can use the templates in a provisioning file to extend the range of functions on the phone. These additional functions can be assigned to function keys.
Requirement for use
• Provisioning from PBX search enabled, see Provisioning
• PBX firmware from Version 7.4
• Suitable template < > phone assignment on the PBX
During the next provisioning process, the configurations in the template file are loaded into the phone. The additional PBX functions are in the Choose a function menu (phone) or Function menu (web interface) and can be assigned to the function keys.
You will find more information on this subject in the Provisioning topic and in the Auerswald DokuWiki.