Firmware Update
A firmware update involves updating the firmware To add new features and resolve any problems that might exist. Here, the device sets up a connection with an update server, from which it downloads the latest firmware. (The settings on the device remain unchanged). There are three ways to carry out a firmware update:
• Manual update
• Automatic update
• Provisioning
Requirements for configuration
• Connection to a broadband Internet connection
• Address of the update server
Manual Update
During a manual update, the downloading of the update is triggered manually. After the update, the phone restarts automatically.
Configuring a manual update
With the Configuration Manager:
• Firmware Update > Basic Network Settings
You will find more information on this subject in the Basic Settings topic.Or directly on the phone:
• Settings > Firmware Update
You will find more information on this subject in the Firmware Update topic.Or using provisioning:
• You will find more information on this subject in the Auerswald DokuWiki
Manual update process
1.Enable Check for updates
2.Enter the Update server URL
In the default settings: https://update.auerswald.de
3.Configuration Manager: Press the Start update button
Phone: Press the Install soft key as soon as the message that a new firmware version is available is displayed on the screen.
Automatic update
In the case of an automatic update from the update server, a regular (e.g. weekly) automatic update can be configured. You can set the weekday and time.
Configuring an automatic update
With the Configuration Manager:
• Firmware Update > Basic Settings
You will find more information on this subject in the Basic Settings.Or directly on the phone:
• Settings > Firmware Update
You will find more information on this subject in the Firmware Update topic.Or using provisioning:
• You will find more information on this subject in the Auerswald DokuWiki
Note: It can take up to 60 minutes to perform an automatic update.Automatic update process
1.Enable Automatically install updates
2.Enter the Update server URL
In the default settings: https://update.auerswald.de
3.Configuration Manager:
Set the Weekdays and Clock Time.
Note: When you set the Weekday/Clock Time for an automatic update, the system checks for new firmware during this time period and downloads and installs it if necessary. Is automatic update is not enabled, the system only checks for a newer version of the firmware during this time period. If there is a newer version of the firmware, you are informed in a message on the screen.Provisioning
During provisioning, the phone is automatically configured via a provisioning server. Here, the phone sets up a connection with a provisioning server, over which it receives the necessary configuration data. A firmware update is then carried out.
You will find more information on the provisioning process in Provisioning.