Configuring fax printer driver
Before sending the first fax using the installed printer driver COMpact/COMmander Fax, at least one fax box of the PBX has to be configured in the printer driver.
1.In order to open the printer driver, print a test document (e.g. word document) via the printing function of the PC program. In the printer selection dialog, select the printer driver COMpact/COMmander Fax.
2.If necessary, enter in the entry field Fax box name a name for identification.
*Note: It makes sense to use the same name that has been given to the fax box in the web interface of the PBX.
3.In the entry field User/group number enter the internal number of the user of the correponding fax box.
*Note: Entering a group number is not possible.
4.In the entry field User Password enter the password of the corresponding user.
*Important: By activating the checkbox Display PIN, the entered password is displayed unencrypted. As for security reasons, deactivate this function immediately after editing.
5.In the entry field Network address enter the PBX's IP address.
6.Select Validating. The login information is checked, a dialog is opened which displays the result of the check. Use OK to close the window.
7.If in the PBX the option Automatic exchange line request is deactivated: Activate in the printer driver the checkbox Preset automatically to put the exchange line access number in front of the recipient's fax number.
8.If in the PBX the option Automatic exchange line request is deactivated: In the entry field Exchange line access number enter the exchange line access number in the PBX.
9.If necessary, select New and repeat steps 2 to 8 to configure another fax box of the PBX in the printer driver.
10.Select OK and Close.