Help > Using the web interface > Administration > Network > IP configuration > IP configuration
IP configuration
Obtain IP address automatically (DHCP client)
The PBX automatically receives its IP address from the DNS server.
*Further help under Network
Assigning IP address manually
Requirements:
•Disabled DHCP client
IP address
IPv4 address in the range 0 - 255 (example: 192.168.0.240).
Subnet mask
IPv4 address of the subnet mask in the range 0 - 255 (example: 255.255.255.0).
Gateway
IPv4 address of the gateway in the range 0 - 255 (example: 192.168.0.2).
*Further help under Network
Permanent IP address from the APIPA address range
The PBX can be reached via the IP address 169.254.1.240, if
•it is directly connected to an individual computer which automatically receives its IP address.
•it is connected to a router that automatically assigns IP addresses.
*Further help under Network
MAC address
Displays the specific and unique hardware address of the PBX.
*Further help under Network
IPv6 configuration|
Opens the IPv6 configuration.
IPv6 Mode
If IPv6 is switched on, an IP address complying with version 6 of the Internet protocol can be assigned to the PBX. Thanks to the greater length of IPv6 addresses (eight blocks with four digits each, example: 3001:00FF:ABC0:0EAC:0001:0000:0000:000F), IPv6 offers a greater number of available IP addresses than version 4 of the Internet protocol (IPv4).
deactivated
Switches off the use of IPv6 addresses.
SLAAC
Automatically assigns an IPv6 address to the PBX.
static
Assigns a user-defined IPv6 address to the PBX.
*Note: If IPv6 has been disabled for the PBX, IPv6 can also not be enabled for any modules. If, in the reverse, IPv6 has been enabled for the PBX, it is also enabled automatically for all modules and cannot be disabled.
*Further help under Network
IPv6 address
Requirements:
•IPv6 modestatic selected
IPv6 address
IPv6 address of the PBX.
*Further help under Network
Prefix length
Requirements:
•IPv6 modestatic selected
Prefix length
Prefix length in the range 1 up to 128. The prefix specifies to which subnet the IPv6 address belongs.
*Further help under Network
IPv6 gateway
Requirements:
•IPv6 modestatic selected
IPv6 gateway
Possible entries: Digits, characters and :.
*Further help under Network