Help > Using the web interface > External Devices > Announcement outputs > Configuration of the announcement output
Configuration of the announcement output
Configuration of the announcement output
Select the announcement output to be configured.
*Further help under Loudspeaker Audio Out
Enable connection
Settings of the DTMF sequences for controlling the announcement output to enable the connection. The DTMF sequences used by the connected device are to be found in the according instruction. You can use the comma ',' character as a pause of half a second.
*Further help under Loudspeaker Audio Out
Finish connection
Settings of the DTMF sequences for controlling the announcement output to terminate the connection. The DTMF sequences used by the connected device are to be found in the according instruction. You can use the comma ',' character as a pause of half a second.
*Further help under Loudspeaker Audio Out
Dead time
Waiting time in milliseconds before the PBX sends DTMF sequences to the announcemebt output again. Possible entries: 0 to 10000 milliseconds. Time settings for receiving DTMF sequences again are to be made in accordance with the instructions of the connected devices.
*Further help under Loudspeaker Audio Out
SIP password
SIP password required by the connected device.
*Further help under Loudspeaker Audio Out
Close
The dialogue for the configuration is closed, already created data is discarded.
Save and close
The dialogue for the configuration is closed, already created data is saved.