Button
The COMtrexx Business offers the following buttons for proceeding service functions:
aLED Power
bLED Status
cButton Reset
dButton Software altern.
eButton Software default
Restart
To initiate a restart, proceed as follows:
Caution: This interrupts all the connections with/to the web server, all the calls and the data services. Unsaved data is lost!•Press the Reset.
The LEDs indicate the following states:
−The Power LED lights up/flashes in red and orange for up to two minutes.
−If the Power LED lights up in green again, the restart is complete and the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has occurred. Please contact your dealer or the manufacturer directly.
Further help under RestartRestoring firmware
To restore the previous firmware (e.g. in case of problems after an update), proceed as follows:
Important: First read the steps to be taken.Caution: Afterwards a restart is carried out automatically. This interrupts all the connections with/to the web server, all the calls and the data services. Unsaved data is lost!1.Successively press the buttons Reset and Software altern. and keep the button Software altern. pressed.
The LEDs indicate the following states:
−The Status LED starts to quickly blink in orange.
−After a short time, the Status LED will slow down.
2.Let go of the Software altern. button.
The LEDs indicate the following states:
−The Power LED lights up/flashes in red and orange for up to two minutes.
−If the Power LED lights up in green again, the restart is complete and the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has occurred. Please contact your dealer or the manufacturer directly.Further help under Firmware UpdateFactory settings
To restore the factory settings, proceed as follows:
Important: First read the steps to be taken.Caution: Afterwards a restart is carried out automatically. This interrupts all the connections with/to the web server, all the calls and the data services. Unsaved data is lost!1.Successively press the buttons Reset and Software default and keep the button Software default pressed.
The LEDs indicate the following states:
−The Status LED starts to quickly blink in red.
−After a short time, the Status LED will slow down.
2.Let go of the Software default button.
The LEDs indicate the following states:
−The Power LED lights up/flashes in red and orange for up to two minutes.
−If the Power LED lights up in green again, the restart is complete and the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has occurred. Please contact your dealer or the manufacturer directly.Note: If you let go of the Software default button too late (the Status LED flashes no more), the PBX restarts without changes.