Help > Using the web interface > Administration > Network > IP configuration > DHCP server settings for NET-module
DHCP server settings for NET-module
Use DHCP server for NET module
Requirements:
If internal and external VoIP telephony are to be connected at the same network interface: Disabled Obtain IP address automatically (DHCP client) (page Administration > Network > IP Configuration under NET module)
When connecting SIP devices to the 2nd network interface, it is advisable to enable the DHCP server in order to supply the SIP devices with IP addresses and other information (NTP server address, gateway address etc.).
*Further help under Network interface (second)
*Further help under Network
Begin with DHCP address range
Begin of the IP address range from which the IP addresses are to be assigned.
Only IP addresses within the changeable range of the corresponding network class can be entered.
*Further help under Network interface (second)
*Further help under Network
End of DHCP address range
End of the IP address range from which the IP addresses are to be assigned.
Only IP addresses within the changeable range of the corresponding network class can be entered.
*Further help under Network interface (second)
*Further help under Network
DHCP configuration
Opens the DHCP config editor for importing and editing the configuration.
Import
A configuration saved on the data storage device (PC) can be selected and is saved onto the PBX. The configuration can be edited in the DHCP config editor.
*Further help under Network interface (second)
*Further help under Network
Default
All settings made will be reset to the standard values.