Alarm

Confirming an Alarm within 60 sec (on an Internal or External Phone)

Additional information

Alarm enabled once: Alarm input is disabled after triggering and alarm must be enabled again.

Alarm enabled always: Alarm input remains enabled after triggering and another alarm can be triggered.

Activating an Alarm Once (on an Internal Phone)

## 8 PIN * 24 Alarm number * 1 #

PIN	Admin or sub-admin PIN
Alarm number	Alarm number (for exchange line request type Direct exchange line phone: with preceding **)
Additional information	Alarm input is disabled after triggering.

Activating an Alarm Once (on an External Phone)

Remote switching number ## 8 PIN * 24 Alarm number * 1 #

Remote switching number	Remote switching number for remote programming
PIN	user PIN
Alarm number	Alarm number
Additional information	Alarm input is disabled after triggering.

Activating an Alarm Always (on an Internal Phone)

## 8 PIN * 24 Alarm number * 2 #

PIN	Admin or sub-admin PIN
Alarm number	Alarm number (for exchange line request type Direct exchange line phone: with preceding **)
Additional information	Alarm input stays enabled even after triggering.

Activating an Alarm Always (on an External Phone)

Remote switching number ## 8 PIN * 24 Alarm number * 2 #

Remote switching number	Remote switching number for remote programming
PIN	user PIN
Alarm number	Alarm number
Additional information	Alarm input stays enabled even after triggering.

Deactivating an Alarm (on an Internal Phone)

## 8 PIN * 24 Alarm number * 0 #

PIN	Admin or sub-admin PIN
Alarm number	Alarm number (for exchange line request type Direct exchange line phone: with preceding **)
Additional information	Alarm input is disabled and will not react to triggering.

Deactivating an Alarm (on an External Phone)

Remote switching number ## 8 PIN * 24 Alarm number * 0 #

Remote switching number	Remote switching number for remote programming
PIN	user PIN
Alarm number	Alarm number
Additional information	Alarm input is disabled and will not react to triggering.

Recording an Announcement (on an Internal Phone)

## 8 PIN * 56 A * * #

PIN	Admin or sub-admin PIN
A	36...39 (no. 1-4 of the announcement) 71...86 (no. 1-16 of the announcement)
Additional information	Wait for trilling tone after 2nd . Start recording with 3rd . Stop recording with #. Afterwards the recording is played back for checking. Both number ranges can be used for A (also at the same time) but a maximum of 16 announcements is configurable.

Deleting the Announcement (on an Internal Phone)

## 8 PIN * 55 A #

PIN	Admin or sub-admin PIN
A	36...39 (no. 1-4 of the announcement) 71...86 (no. 1-16 of the announcement)
Additional information	Both number ranges can be used for A (also at the same time) but a maximum of 16 announcements is configurable.

Listening to the Announcement (on an Internal Phone)

## 8 PIN * 57 A #

PIN	Admin or sub-admin PIN
A	36...39 (no. 1-4 of the announcement) 71...86 (no. 1-16 of the announcement)
Additional information	Both number ranges can be used for A (also at the same time) but a maximum of 16 announcements is configurable.